Hoverboard Charger

Hoverboard Charger

$24.99

 

【4 Protection design】1.Short circuit protection; 2.Battery polarity error protection; 3.Over current protection; 4.Over voltage protection
【HIGHLIGHTS】LED light clearly show the standby and charging condition.Red light means charging, green light means charge full or disconnect
【Feature】8 detection process, special inspection, professional equipment testing, product failure rate control in 1/1000.Faster and safer charging with our adapter,Intelligent high-speed charging for most 42V versions scooters
【Details】Input: 100-240VAC,50/60Hz,1.5A Output : 42V 2000mA. Maximum operation temperature <40℃.Mains supply tolerance: 100-240Vac (-10%/+10%).Diameter of the plug is about 8mm(0.31inch),the charger is not fit razor.please check your devices before order.
【Note】 A.if you receive a bad item, please feel free to mail me, and i am willing to resend a new one to you. B. Please notice: the input voltage is 100-240V for this charger. C. Please confirm the 3 pins post insert correctly.trained service personal only.Please do not overcharge. When the ligth is green, please remove the charge.

Please note that:

-This plug is diameter about 8mm(0.31inch),
-The charger is not fit for Razor ,
-The charger Optimum life is 1 year
-Do not use over 5 hour per charge time
-Please charge in a ventilated environment
-Please don’t cover the charger
-Only use for lithium battery ,
Please check your model and better before purchasing!!!

We do our best to make every product

1 Anti interference, good safety performance, high reliability
2 High efficiency, small heat, long service life
3 With short circuit, overload, over voltage, over temperature protection

If it does not charge your device, there may be one of the following reasons:
1.The charger is not suitable for your device, please tell us the brand and model of your device.
2. Due to the limited life of lithium batteries, Your battery is broken.If your battery has been used for more than 12 months or unused for 2-3 months, your battery might be damaged.

Product Description
Input: AC 100-240V 50/60Hz 1.5A

Output:42V 2A (Please check carefully the input voltage of your product)
The beginning of the charging temperature will be a little high, the temperature will slowly come down later, because at the beginning, which is no electricity, with the more power charge more and more, the temperature will become lower and lower.

Weight 0.500 kg
Dimensions 30 × 20 × 10 cm
Updating…
  • No products in the cart.
5
0%
4
0%
3
0%
2
0%
1
0%